Product Description
● This machine is suitable for the production of 200ml-10L plastic hollow products, the use of curved elbow lock system, low energy consumption, the center of the lock, the lock force, speed faster, run more smoothly.
● Die opening and closing system: specially designed for Heng lock mould mechanism using a high pressure mode locking, locking plate stress in the centre of the template, clamping force, open the rigid lock template, even if the ultra wide die is also fitted.
● Die head system:all the use of 38CRMOALA and other materials, the precision machining and heat treatment.
● Hydraulic system:full hydraulic double proportional hydraulic control, equipped with imported famous brand hydraulic valve and oil pump, stable, reliable.
● Automatic flying side device: in addition to the overflow device can accurately remove the product of the residual material, and with a straight push type in addition to the overflow device and a rotary knife type in addition to overflow device, the real realization automatic equipment without manual operation.
Specification
| Specification | SLBUD-80 | SLBUD-90 |
| Material | PE,PP,EVA,ABS,PS… | PE,PP,EVA,ABS,PS… |
| Max container capacity (L) | 10 | 20 |
| Number of die (Set) | 1,2,3,4,6,8 | 1,2,3,4,6,8 |
| Output(dry cycle) (pc/hr) | 400*2 | 220*2 |
| Machine Dimension(LxWxH) (M) | 4200*2800*2200 | 5200*3200*2400 |
| Total weight (Ton) | 8T | 15T |
| Clamping Unit | ||
| Clamping force (KN) | 120 | 160 |
| Platen opening stroke | 250-600 | 350-750 |
| Platen size(WxH) (MM) | 500*450 | 600*600 |
| Max mould size(WxH) (MM) | 500*450 | 600*580 |
| Mold thickness (MM) | 255-350 | 360-420 |
| Extruder unit | ||
| Screw diameter (MM) | 80 | 90 |
| Screw L/D ratio (L/D) | 25 | 25 |
| Melting capacity (KG/HR) | 120 | 140 |
| Number of heating zone (KW) | 20 | 30 |
| Extruder heating power (Zone) | 4 | 5 |
| Extruder driving power (KW) | 30 | 45 |
| Die head | ||
| Number of heating zone (Zone) | 3-12 | 3-12 |
| Power of die heating (KW) | 10-30 | 10-30 |
| Center distance of double die (MM) | 250 | 250 |
| Center distance of tri-die (MM) | 110 | 130 |
| Center distance of tetra-die (MM) | 100 | 100 |
| Center distance of six-die (MM) | 80 | 80 |
| Max die-pin diameter (MM) | 260 | 280 |
| Power | ||
| Max drive (KW) | 35 | 50 |
| Total power (KW) | 82 | 110 |
| Fan power for screw | 3.2 | 4 |
| Air pressure (Mpa) | 0.6-0.8 | 0.8-1 |
| Air consumption (m³/min) | 0.5 | 0.6 |
| Average energy consumption (KW) | 26 | 35 |
